background image

Printing (PC)

55

Side seam

construction

Peel-off strip

Multiple flaps

Twist

Curl

Bent-edge

Wave

Dog-ear

Self adhesive

Clasp

Transparent window

Insert envelopes
as shown.

Adjust the 
recording 
paper 
guides.

— High quality envelopes of 90 

g

/m

2

paper,

— Envelopes that have thin, sharply creased leading

edges, and

— Envelopes that have diagonal seams as shown. (right)

You can load up to 10 envelopes of 90 

g

/m

paper at a

time for printing. Print side must face down.

Remove each envelope after printing.

Wrinkles may occur in some cases, even if high quality
envelopes are used.

Avoid printing in high humidity, above 70% relative

humidity (RH). High humidity may cause the envelope to
curl, pick up excess toner or seal the envelope.

Avoid printing below 10 °C with less than 30% RH, or it
may cause light printing.

Store envelopes away from moisture and humidity, where
they can lay flat and their edges will not be bent or
damaged. The humidity should not exceed 70% RH.

Do not use envelopes with any of the following
characteristics (using these may result in paper jams):

Irregularly shaped envelopes

Envelopes with curls, wrinkles, nicks, twists, 
dog-ears or other damage

Envelopes with side seam construction

Highly textured envelopes, or envelops with extremely 
shiny surfaces

Envelopes that seal by removing a peel-off strip

Envelopes with more than one flap to be sealed

Self-adhesive envelopes

Envelopes that are baggy or not sharply creased

Embossed envelopes

Envelopes that have previously been printed on

Envelopes that include cotton and/or fibre material

Do not attempt to print on any of the following types of
envelopes (these may cause damage to the fax machine):

Envelopes with clasps, snaps or tie strings

Envelopes with transparent windows

Envelopes that use encapsulated types of adhesive that do
not require moistening but rely on pressure to seal them

Use envelopes designed for laser printing. We recommend the following:

Envelopes

KX-FLB756E (050-059)  03.2.19  4:20 PM  Page 55

Summary of Contents for KX-FLB756E



























































































Reviews: