Panasonic KX-FC235E Page 98 Operating Instructions Manual Download

Page: 98 / 114

11. Help

11.3.7 Answering machine

11.3.8 SMS

The printing quality is
poor.

Please do not reuse the ink film!
Please use genuine Panasonic replacement film. Refer to page 11 for
further details.

Original

Copy

Some paper has instructions recommending which side to print on.
Try turning the paper over.

You may have used paper with a cotton and/or fibre content that is
over 20%, such as letterhead or resume paper.

The thermal head is dirty. Clean it (page 103).

Problem

Cause & Solution

The answering machine is
turned ON, but caller
messages are not
recorded.

The message memory is full. Erase unnecessary messages (page
63).

I cannot retrieve recorded
messages from a remote
location.

Activate the remote operation feature by setting the remote
operation ID beforehand (feature #11 on page 68).

Press the remote operation ID correctly and firmly (page 65).

The unit is not in TAM/FAX mode. Change to TAM/FAX mode (page
57).

You are using a pulse telephone. Try again using a touch tone
phone.

The other party complains
that they cannot leave a
voice message.

The memory is full. Erase unnecessary messages (page 63).

While recording a
greeting message or
listening to messages, the
unit rings and recording
stops.

A call is being received. Answer the call and try again later.

Problem

Cause & Solution

I cannot send or receive
SMS messages.

You have not subscribed to the appropriate service. Consult your
service provider.

The SMS message centre number(s) are not stored or are
incorrect. Store the correct numbers (page 41).

Message transmission was interrupted. Wait until the message has
been sent before using other telephone functions.

SMS message memory is full. Erase unnecessary message in the
receive and send lists (page 43, 44).

“

” is displayed.

The unit could not connect to the SMS message centre. Confirm
that the correct SMS message centre numbers are stored (page
41). Confirm that SMS is turned ON (page 41).

Problem

Cause & Solution

A B C

FC235E-PFQX2180YA_en.book Page 96 Monday, June 27, 2005 11:54 AM

Summary of Contents for KX-FC235E



















































































































Search results

Summary of Contents for KX-FC235E

Reviews:

Related manuals for KX-FC235E

Brands by name

Popular brands

Panasonic KX-FC235E, Operating Instructions Manual

Search results

Summary of Contents for KX-FC235E

Reviews:

Related manuals for KX-FC235E

Brands by name

Popular brands