manualshive.com logo in svg

Panasonic KX-FC235E, Operating Instructions Manual, Page: 96 / 114

Share
Download
Panasonic KX-FC235E Operating Instructions Manual Download Page 96

11. Help

94

11.3.5 Fax – receiving

I cannot send a fax 
overseas.

L

Use the overseas transmission mode of feature #23 (page 69).

L

Add two pauses at the end of the telephone number or dial 
manually.

The other party complains 
that letters on their 
received document are 
distorted or not clear.

L

If your line has special telephone services such as call waiting, the 
service may have been activated during fax transmission. Connect 
the unit to a line that does not have these services.

L

Another telephone on the same line is off the hook. Hang up the 
telephone and try again.

L

Try copying the document. If the copied image is clear, there may 
be something wrong with the other party’s machine.

L

Adjust the scan contrast using feature #58 (page 71).

The other party complains 
that black lines, white 
lines or smudges appear 
on their received 
document.

L

The scanner glass, white plate or rollers are dirty with correction 
fluid, etc. Clean them (page 102). Please do not insert a document 
before correction fluid has dried completely.

Problem

Cause & Solution

I cannot receive 
documents.

L

The ink film is empty. Replace the ink film with a new one (page 
18).

I cannot receive 
documents automatically.

L

The receiving mode is set to TEL mode.
Change the receiving mode to TAM/FAX mode (page 57), FAX 
ONLY mode (page 58) or TEL/FAX mode (page 56).

L

The time taken to answer the call is too long. Decrease the number 
of rings before the unit answers a call (feature #06 on page 68 and 
#78 on page 71).

L

The greeting message is too long. Record a shorter message 
(page 62).

The display shows 
“

CONNECTING.....

”, but 

faxes are not received.

L

The receiving mode is set to FAX ONLY mode and the incoming 
call is not a fax. Change the receiving mode to TEL mode (page 
55), TAM/FAX mode (page 57) or TEL/FAX mode (page 56).

A blank sheet is ejected.

L

If a blank sheet is ejected after the received document is printed 
out, the size of the document sent by the other party is as large as, 
or larger than, the recording paper, or the receiving reduction rate 
is not programmed correctly. Program the proper rate in feature 
#36 (page 69).

L

The other party placed the document in their fax machine the 
wrong way. Check with the other party.

Problem

Cause & Solution

FC235E-PFQX2180YA_en.book  Page 94  Monday, June 27, 2005  11:54 AM

Summary of Contents for KX-FC235E



















































































































Reviews:

No comments