Panasonic KX-FC235E, Operating Instructions Manual, Page: 73 / 114

8. Programmable Features
71
Code #53: Turning SMS ON/OFF
SMS
=OFF [
±
]
See page 41 for details.
Code #54: Changing the recording time for
your TAM/FAX greeting message
GREETING TIME
=16s [
±
]
“
16s
” (default): Maximum recording time is 16
seconds.
“
60s
” : Maximum recording time is 60 seconds.
See page 62 for details.
Code #58: Setting the scan contrast
SCAN CONTRAST
=NORMAL [
±
]
To send or copy a document with faint or dark
writing, set this feature before transmission or
copying.
“
NORMAL
” (default): Used for normal writing.
“
LIGHT
” : Used for dark writing.
“
DARKER
” : Used for faint writing.
Code #67: Setting the incoming message
monitor
ICM MONITOR
=ON [
±
]
To hear an incoming message (ICM) from the
speaker when the answering device is recording
the message.
“
ON
” (default): You can monitor the incoming
message.
“
OFF
” : Deactivates this feature.
Code #68: Setting the Error Correction Mode
(ECM)
ECM SELECTION
=ON [
±
]
This feature is available when the
transmitting/receiving fax machines are ECM
compatible.
“
ON
” (default): If there is an error during fax
transmission/reception, the fax machine will
support the communication.
“
OFF
” : Deactivates this feature.
Note:
L
You cannot change the setting when received
documents are in memory.
Code #73: Changing the receiving mode in
the manual answer setting
MANUAL ANSWER
=TEL [
±
]
“
TEL
” (default): Telephone mode (page 55)
“
TEL/FAX
” : Telephone/Fax mode (page 56)
Code #76: Setting the connecting tone
CONNECTING TONE
=ON [
±
]
If you often have trouble when sending faxes,
this feature allows you to hear connecting tones:
fax tone, ring back tone and busy tone. You can
use these tones to confirm the status of the other
party’s machine.
“
ON
” (default): You will hear connecting tones.
“
OFF
” : Deactivates this feature.
Note:
L
If the ring back tone continues, the other
party’s machine may not be a fax machine or
may have run out of paper. Check with the
other party.
L
The connecting tone volume cannot be
adjusted.
Code #77: Changing the receiving mode in
the auto answer setting
AUTO ANSWER
=TAM/FAX [
±
]
“
TAM/FAX
” (default): Telephone Answering
Machine/Fax mode (page 57)
“
FAX ONLY
” : Fax only mode (page 58)
Code #78: Changing the TEL/FAX delayed
ring setting
TEL/FAX RING
RINGS=2 [
±
]
If you use an extension telephone in TEL/FAX
mode, select the desired number of times the
extension telephone rings before the unit
answers the call. You can select
“
1
” , “
2
”
(default), “
3
” , “
4
” , “
5
” , “
6
” , “
7
” “
8
” or “
9
” . See
page 56 for details.
Code #80: Resetting advanced features to
their default settings
SET DEFAULT
RESET=NO [
±
]
To reset the advanced features:
1. Press
{
MENU
}
.
2. Press
{#}
, then
{
8
}{
0
}
.
3. Press
{A}
or
{B}
repeatedly to select “
YES
” .
FC235E-PFQX2180YA_en.book Page 71 Monday, June 27, 2005 11:54 AM