7. Answering Machine
66
{
9
}
Stop
L
Recording of the greeting message is
stopped.
{*}{
4
}
Erase a specific message (During
playback)
L
The current message is erased and the next
message will be played.
{*}{
5
}
Erase all messages
L
All recorded messages are erased.
{
0
}
Skip greeting message
L
The greeting message is skipped.
{
8
}{
0
}
Turn OFF auto answer setting
L
The receive mode will be changed from
TAM/FAX mode to TEL mode or TEL/FAX
mode depending on the setting of feature #73
(page 71).
L
You cannot return to TAM/FAX mode in the
same call.
To turn ON the auto answer setting
1.
Call your unit and wait for 25 rings.
L
A beep will sound.
2.
Enter the remote operation ID (feature #11 on
page 68) within 8 seconds.
L
The auto answer setting will be turned
ON. The receiving mode will be set to
TAM/FAX or FAX ONLY mode, depending
on the setting of feature #77 (page 71).
3.
Hang up the handset.
Note:
L
You cannot turn ON the auto answer setting
when the unit is set to TEL/FAX mode.
Recording a marker message
After playing back the messages, you can leave
an additional message.
1.
Wait for 3 beeps indicating the end of the
remote operation.
2.
Hear 1 beep.
3.
Wait about 10 seconds.
4.
Hear the voice guide or hear 1 beep.
5.
Leave a message.
Note:
L
If you do not enter a remote command key
within 10 seconds after the last operation, the
unit will ask you to leave a marker message.
FC235E-PFQX2180YA_en.book Page 66 Monday, June 27, 2005 11:54 AM
Summary of Contents for KX-FC235E
Page 48: ...4 Telephone 46 10 Press ih ...