Panasonic KX-FC235E Operating Instructions Manual Download Page 13

Page: 13 / 114

1. Introduction

1.2 Accessory information

1.2.1 Sales and Support Information

Customer Care Centre

For customers within the UK: 08701 580560

For customers within the Republic of Ireland: 01 289 8333

Visit our website for product information

E-mail:

[email protected]

Direct Sales at Panasonic UK

Order accessory and consumable items for your product with ease and confidence by phoning our
Customer Care Centre Monday - Thursday 9:00am - 5:30pm, Friday 9:30am - 5:30pm (Excluding
public holidays).

Or go on line through our Internet Accessory ordering application at

www.panasonic.co.uk

Most major credit and debit cards accepted.

All enquires transactions and distribution facilities are provided directly by Panasonic UK Ltd.

It couldn’t be simpler!

Also available through our Internet is direct shopping for a wide range of finished products, take a
browse on our website for further details.

Additional/replacement accessories

*1 We recommend that you buy a full-size replacement film for continuous use of your unit. Please use

genuine Panasonic replacement film.

The ink film is not reusable. Do not rewind and use the ink

film again.

Model No.

Item

Specifications/Usage

KX-FA54X

Replacement film

35 m

2 rolls (Each roll will print about 105

A4-sized pages.)

P03P

Rechargeable batteries

2 rechargeable nickel metal hydride (Ni-
MH) batteries

KX-TCA121E

Additional handset

----------

KX-A272

DECT repeater

----------

FC235E-PFQX2180YA_en.book Page 11 Monday, June 27, 2005 11:54 AM

Summary of Contents for KX-FC235E



















































































































Search results

Summary of Contents for KX-FC235E

Reviews:

Panasonic KX-FC235E, Operating Instructions Manual, Page: 13 / 114

Search results

Summary of Contents for KX-FC235E

Reviews: