Panasonic KX-F910BX, Service Manual

Page: 9 / 237

|
12
|
KX-F910BX
1. Installing the recording paper
A 1
Open the back lid by lifting up the tabs located
on the both sides.
Install a recording paper roll in the main unit.
Make sure that the shiny side of the paper is
facing down and there is no stack, tape, or
glue residue on the paper roll.
B
3 Close the back lid by gently pressing down on both
ends.
2
Insert the leading edge of the recording paper
between the recording paper roller and the silver
plate.
incorrect correct
INSTALLATION
Note:
Only use the included roll of paper or specified recording paper, or else the print quality may be affected
and/or excessive thermal head wear may occur.
The beginning of some recording paper rolls are secured with glue or tape.
Cut approximately 150 mm (6 inches) from the new roll of paper prior to installation.
Tab
A
B
Recording paper roller
Silver plate