background image

Important Information

18                                                                                                   

Document Version 2009-03

Customer Information

This equipment complies with Part 68 of the FCC rules and the 
requirements adopted by the ACTA. On the bottom of the cabinet of this 
equipment is a label that contains, among other information, the following 
product identifier: 

 

US: ACJKXNANKX-DT321

 

If requested, this number must be provided to the telephone company.

If trouble is experienced with this equipment KX-DT321, for repair or 
warranty information, please contact:

Panasonic Service and Technology Company-BTS Center
415 Horizon Drive Bldg. 300 Ste. 350-B
Suwanee, GA 30024-3186

If the equipment is causing harm to the telephone network, the telephone 
company may request that you disconnect the equipment until the problem 
is resolved.

Hearing Aid Compatibility:

This telephone provides magnetic coupling for hearing aids.

Compliance with TIA-1083 standard:

Telephone handsets identified with this logo have 
reduced noise and interference when used with T-Coil 
equipped hearing aids and cochlear implants.

T

Compatible with

Hearing Aid T-Coil

TIA-1083

Summary of Contents for KX-DT321-B - KX - Digital Phone





















Reviews: