Panasonic KX-A242, Installation Instructions Manual

Page: 1 / 12

Installation Instructions
2. Lay the Hybrid IP-PBX on its back, with the front side facing up. Remove the screws from the underside of the base,
as shown. (3 screws on the KX-TDA100, 4 screws on the KX-TDA200.) Remove the base.
3. Remove the 4 screws as shown. Remove the side panels.
Note: Re
t
ain these screws for use in step 5.
1. Remove the front cover. Refer to "Opening/Closing the Front Cover" in the Installation Manual.
KX-A243 Brackets
(for use with KX-TDA100)
KX-A242 Brackets
(for use with KX-TDA200)
4 4 1 4 4
Unpacking
2
19-inch Rack Mounting Adaptor, KX-A242/KX-A243 Installation
1 1
Rear Cover Side Cover
Bracket Screw Rail Screw
Washer Nut
KX-TDA200 KX-TDA100
Model shown is KX-TDA200.
OR