Panasonic KV-SS905C Reference Manual Download Page 138

Page: 138 / 158

138

4.10 Invert Image

This image filter converts the white pixels into black pixels and vice versa.

4.11 Line Removal

This image filter reconstructs or removes the ruled lines on images. When it is used,
the OCR results can be improved.

[Line Removal Properties] dialog box

Mode

The mode is selected here.

Remove lines

The lines are detected and removed.

Remove lines and repair

The lines are detected and removed. Next, the text and/or patterns
superimposed on the removed lines are restored.

Reconstruct lines and repair

The lines are detected and removed. Next, the text and/or patterns
superimposed on the removed lines are restored. Furthermore, straight lines
are then redrawn at the same locations as the removed lines.

Before Line Removal

After Line Removal

Summary of Contents for KV-SS905C































































































































































Search results

Summary of Contents for KV-SS905C

Reviews:

Related manuals for KV-SS905C

Brands by name

Popular brands

Panasonic KV-SS905C, Reference Manual

Search results

Summary of Contents for KV-SS905C

Reviews:

Related manuals for KV-SS905C

Brands by name

Popular brands