8.3 Replacing the Rollers
As a rough guideline, we recommend to replace the paper feed roller and double feed prevention roller
module after scanning 250,000 sheets of paper. ("250,000 sheets" is based on scanning high-quality
woodfree paper. Depending on the type of paper and other factors, the actual lifetime of the rollers may be
shorter.)
In User Utility, you can check the number of sheets that have been scanned.
Notice
•
Be careful not to damage any parts of the unit.
1.
2.
Open the double feed prevention roller cover ( ).
1
3.
Remove the double feed prevention roller.
•
While pushing the latch ( ) to the right side as the direction indicated by the arrow, remove the
double feed prevention roller ( ) in the direction of the arrow. Then, pull out the left shaft (when
facing it) from the notch in the roller mount.
2
1
4.
Take out the new double feed prevention roller module in the optional roller exchange kit.
8.3 Replacing the Rollers
59
