Cleaning the Unit
42
∫
Cleaning the sensors
1
Turn the power off.
2
Using your hand, pull the front door
release towards you.
≥
The front door now opens slowly.
3
Remove the dirt on the document sen-
sors, double feed detector, paper sen-
sor and reflectors with the included
blower.
4
Open the back door by pulling the back
door release, and open the post-
imprinter door.
5
Also remove the dirt on the document
sensors using included blower.
6
Close all doors.
µ
How to clean the sensors and double
feed detectors
Remove the brush and blow off the dirt through the
sensor hole or double feed detector hole.
Document
sensors
Document sensors
Double feed detector
Post-imprinter door
Reflectors
Double feed detector
Paper sensor
Reflectors
Reflectors
Blower
Sensor or double
feed detector
Summary of Contents for KV-S3105C
Page 6: ...Notice 6 Caution Labels...
