Panasonic KV-S1027C, Service Manual

Page: 41 / 255

41
9.2. List of Functions for Service Utility
Service Utility item list is as follows.
Note:
When two or more scanners are connected to a PC, execute “Select Scanner” to specify the scanner before evaluating.
The procedure is as follows.
1. Click “Select Scanner” on the main menu.
2. Select the scanner to evaluate.
Item Purpose Remarks
Scanner Status *1 Used to indicate scanner status (Ready, Error, or Caution) 2
Scanner Information *1 Used to indicate scanner information such as Model, firmware
version, board revision, interface, and etc. 2
Scanner Counter Update Counters *1 Used to update the values of System Counter. 1, 6
Scanner Condition Sleep Mode *1 1. Used to set “Waiting Time” before the scanner enters Sleep
Mode
2. Used to set
“Waiting Time” before the scanner’s power is off.
1
Roller Maintenance*1
Used to set the number of the document scanning that enables
the Service Utility to inform the caution information
(roller replacement timing and roller cleaning timing)
Used to clear counter after roller cleaning or roller replacement. 4
Cleaning Mode*1 Used to help cleaning the conveyor rollers and the exit rollers 1, 3
Set Default Used to set “Sleep Mode” , “Power Off”, and “Caution
Setting” to their default values
3
Test LED Used to periodically light the indicators on the Top Cover 5
Key / Sensor Used to do buttons or sensor ON/OFF tests 5
Conveyor Motor Used to check the Conveyor Motor’s rotation 5
Gate Drive Used to check the open / close operation of the gate by rotating
the Conveyor Motor in the paper feed direction or its reverse
direction
Feed Used to check paper feed operation 5
LCD test for KV-S10xxC
7-segment LED Test
for KV-SL10xx Used to check LCD or 7-segment LED
Sleep Mode Used to check whether the sleep mode function works properly 5
Focus Used to monitor the image output level generated within the
effective pixel width of CIS 5
Double Feed Used to check the level of the Double Feed Detector (R)
(Response level) after setting the ultrasonic emission level of the
Double Feed Detector (G) 5
Memory Used to execute the memory R/W test 5
Platen Motor Used to check Platen Motor rotation
Adjust Shading Used to execute shading correction 4
All Position Used to automatically adjust scanning length, vertical, and
horizontal position adjustment for front and back sides 4
Individual Position 1. Used to automatically adjust scanning length,vertical, or
horizontal position adjustment for front and backsides
individually
2. Used to manually adjust scanning length, vertical, or
horizontal position adjustment for front and back sides
individually 4
Double Feed Used to correct the Double Feed Detector’s ultrasonic emission
level automatically or manually 4
USB ID *2 Used to set a USB ID for the scanner connected to the PC 3
Sensor Sensitive Level Used to check the status (Offset level, Slice level, LED current) of
Starting Sensor
Other System Log *1 Used to save the scanner and PC information 1
Download the latest version Click “ Download the latest version ” to open the site for Pana-
sonic scanner products that provides the scanner software to be
downloaded.
6
Error Log *3 Used to save an error log 6