Panasonic KV-S1027C Service Manual Download Page 20

Page: 20 / 255

6.2. Sensor Mechanism

6.2.1.

Paper Sensor

The Paper Sensor turns ON when the document is properly placed on the Feed Tray to push the arm up away from the sensor.

6.2.2.

Starting Sensor

The Starting Sensor turns ON when the document is fed to the scanning-start position to obstruct the light axis line of the sensor.

6.2.3.

Door Detector

The Door Detector turns OFF when the ADF Door is closed to block the detector with the claw.

Paper Sensor

Paper Feed Direction

Right Side View

Feed Side View

Right Side View

Paper Feed Direction

Starting Sensor[Generate]

Starting Sensor[Receive]

Left Side View

Door Detector

Door Open

Claw

Summary of Contents for KV-S1027C
































































































































































































































































Search results

Summary of Contents for KV-S1027C

Reviews:

Brands by name

Popular brands

Panasonic KV-S1027C, Service Manual

Search results

Summary of Contents for KV-S1027C

Reviews:

Brands by name

Popular brands