Item
Contents
Data Transfer Notification
Sets the notification method (Off / Display / Email) that is used to
indicate that scanning is complete when scanning with an option
selected in "Output to" and "Scan Settings".
•
Off: No notification
•
Display: Display the transfer result on the LCD
•
Email: Send the transfer result to "From Address" by E-mail
–
No user authentication: "From Address" in the "SMTP" settings
(page 107)
–
With user authentication: "From Address" in the "Access
Restrictions"settings (page 110)
Prefix Removal
(Email Subject)
Enable (On) or disable (Off) the settings.
•
Off: Email Subject is "<Host Name> : <Type Code> : <Sequence
ID> <User defined subject>".
•
On: Email Subject is "<User defined subject>".
In the case of an SMTP server test, error notification or scan
notification, the prefix is not removed from the E-mail subject, in
order to clarify who the sender is.
*1
Only displayed when the display language is English.
Counter
Item
Contents
Scan
The number of documents scanned during the scanning process.
This counter is cleared each time you start scanning.
System
The number of documents scanned by the scanner since it was
shipped from the factory.
After Clean Roller Counter
The number of documents scanned since clearing the counter after
cleaning the rollers. Clear after cleaning the rollers.
After Replace Roller Counter
The number of documents scanned since clearing the counter after
replacing the rollers. Clear after replacing the rollers.
Clean Roller Timing
You can change the number of documents scanned before the Roller
Cleaning Notification occurs, if necessary.
Replace Roller Timing
You can change the number of documents scanned before the Roller
Replacement Notification occurs, if necessary.
12.4 Function tab
99
