Panasonic IO-Link SC-LG-CEF User Manual Download Page 22

Page: 22 / 48

3.1 Operating Procedure

WUME-SCLGCT-3

3-2

3.1 Operating Procedure

The procedure for operating

SC-LG-CEF Configuration Tool

is shown below.

Notes: 1) If the

Auto Login

check box in the

Option

window is selected, the

Login

window will not be displayed.

2) When starting

SC-LG-CEF Configuration Tool

for the first time, set a network number to add an IO-

Link master for which no network number has been set.

Reference section

“3.2 Login Window”

SC-LG-CEF Configuration Tool

“3.3 Start Window”

Start

Select appropriate start options for

SC-LG-CEF Configuration

Tool

“3.4.1 Master Port Configuration”

Configuring IO-Link master ports

Configure each port for the IO-Link master.

“4.8 Network Number Setting Function”

Setting a network number (Note 2)

Set a network number for the IO-Link master.

“3.4.2 Select Device Window”

Selecting IO-Link devices

Select IO-Link devices connected to the IO-Link master.

“3.5 Master Information Window”

“3.6 Device Monitoring Window”

“3.7 Device Setup Window”

“3.8 Device Diagnosis Window”

“3.9 Device Information Window”

Specifying various settings and displaying information

Display device information for the IO-Link master, set up IO-

Link devices, and display diagnosis and device information

and graphs for IO-Link devices.

“4.6 Project Saving Function”

“4.10 Exit Function”

Saving the projects and closing the tool

Save various settings and changed projects and close

SC-LG-CEF Configuration Tool

Summary of Contents for IO-Link SC-LG-CEF

















































Search results

Summary of Contents for IO-Link SC-LG-CEF

Reviews:

Related manuals for IO-Link SC-LG-CEF

Brands by name

Popular brands

Panasonic IO-Link SC-LG-CEF, User Manual

Search results

Summary of Contents for IO-Link SC-LG-CEF

Reviews:

Related manuals for IO-Link SC-LG-CEF

Brands by name

Popular brands