PAN9028 Wi-Fi/Bluetooth Module
3 Installation
Quick Start Guide Rev. 1.0
Page 9 of 34
Inserting µSD
Ideally the µSD card with the Ubuntu Linux image is already inserted in the µSD card slot on the
system-on-module, so that the Wandboard will boot from it, if not:
1. Turn around the Wandboard. The audio connectors are facing downwards.
2. The µSD card slot of the system-on-module can be found on the left side.
3. Gently press the connector.
➔
The µSD card will spring out.
Remember the orientation of the contacts. The contacts must face upwards
when the µSD card is inserted.
3.2 Using Device for Remote Control
Certain functions of the PAN9028-IMX can be remote controlled via Wi-Fi. A Wi-Fi capable
device for controlling is needed.
Disabling a Mobile Data Plan
If a mobile device is used that has a SIM card, which supports a mobile data plan for accessing
the internet, it is recommended to switch off the mobile data plan while working with the
PAN9028-IMX. The Wi-Fi access point, provided by the PAN9028 initially, does not provide
access to the internet.
If a mobile plan is available, Android may route any network traffic through the mobile data plan
to the internet, instead of using the seemingly non-functional access point.
To avoid confusion and force Android to route the network traffic through the access point of the
PAN9028, it is recommended that the mobile data plan is switched off.
