Panasonic HYBRID IP-PBX KX-TDA200 Features Manual Download

Page: 40 / 464

1.1.3 Incoming Call Indication Features

1.1.3.1 Incoming Call Indication Features—SUMMARY

Description

Incoming calls are indicated by various methods as follows:

Type

Feature

Description & Reference

Ring Tone

Ring Tone Pattern Se-
lection

A telephone rings when receiving a call. The ring tone
patterns can be changed for each incoming call type.

1.1.3.2 Ring Tone Pattern Selection

Voice-calling

Alternate Receiving—
Ring/Voice

A PT user can select to receive intercom calls by ring
tone or by voice, through personal programming.

1.5.3 Intercom Call

LED
(Light Emitting Diode)

LED Indication

The light shows line conditions with a variety of light
patterns.

1.20.3 LED Indication

Display (Caller’s Infor-
mation)

Display Information

The display shows the caller’s information.

1.20.4 Display Information

External Pager

Trunk Answer from
Any Station (TAFAS)

The external pager sends a ring tone when receiving
a call.

1.17.3 Trunk Answer From Any Station (TAFAS)

Tone/Voice during a
Conversation

Call Waiting

A busy extension hears a tone, or voice from the
handset/built-in speaker indicating that another in-
coming call is waiting.

1.1.3.3 Call Waiting

Feature Guide

1.1.3 Incoming Call Indication Features

Summary of Contents for HYBRID IP-PBX KX-TDA200

















































































































































































































































































































































































































































































Search results

Summary of Contents for HYBRID IP-PBX KX-TDA200

Reviews:

Related manuals for HYBRID IP-PBX KX-TDA200

Brands by name

Popular brands

Panasonic HYBRID IP-PBX KX-TDA200, Features Manual

Search results

Summary of Contents for HYBRID IP-PBX KX-TDA200

Reviews:

Related manuals for HYBRID IP-PBX KX-TDA200

Brands by name

Popular brands