Panasonic HYBRID IP-PBX KX-TDA200, Features Manual

Page: 326 / 464

1.29.2 Confirmation Tone
Description
At the end of feature operations, the PBX confirms the success of the operation by sending a confirmation tone
to extension users.
Type Description
Tone 1 a.
Sent when the setting is accepted.
b.
Sent when a call is received in voice-calling mode
(Alternate Receiving—Ring/Voice). The caller’s voice
will be heard after the tone.
Tone 2 a.
Sent from an external paging device or an extension
before being paged.
b.
Sent when a call is received in Hands-free Answer-
back mode.
Tone 3-1 a.
Sent before a conversation is established when using
the Paging feature.
b.
Sent when a conversation is established with the ex-
tension in the following modes after the call making
operation:
•
Hands-free Answerback mode
•
Voice-calling mode (Alternate Receiving—Ring/
Voice)
c.
Sent when making a call to or from a doorphone.
Tone 3-2 Sent just before a conversation is established when ac-
cessing the following features by the feature numbers:
•
Call Park Retrieve
•
Call Pickup
•
Hold Retrieve
•
Paging Answer
•
TAFAS
Tone 4-1 Sent when moving from a two-party call to a three-party
call. (e.g., Executive Busy Override, Conference, Privacy
Release, Two-way Record.)
Tone 4-2 Sent when moving from a three-party call to a two-party
call. (e.g., Executive Busy Override, Conference, Privacy
Release, Two-way Record.)
Tone 5 Sent when a call is placed on hold (including Consultation
Hold).
Conditions
•
Confirmation Tone Patterns
All confirmation tone patterns have a default (
®
3.3.1 Tones/Ring Tones).
•
It is possible to eliminate each tone.
326 Feature Guide
1.29.2 Confirmation Tone