Panasonic HYBRID IP-PBX KX-TDA200, Features Manual

Page: 30 / 464

1.1.1.6 Intercept Routing
Description
Provides automatic redirection of incoming trunk and intercom calls. There are three types of Intercept Routing
as follows:
Feature Description
Intercept Routing—No Answer
(IRNA) If a called party does not answer a call within a preprogrammed time
period (IRNA Timer), the call is redirected to the preprogrammed des-
tination.
Intercept Routing—Busy If a called party is already handling a call, new calls are handled as
follows:
–
The call is redirected to the preprogrammed Intercept Routing—
Busy destination.
–
If an Intercept Routing—Busy destination is not enabled, the caller
will hear a busy tone. However, if the call is made through an
LCOT/ELCOT or T1 [LCOT/GCOT] card, the caller hears a ring-
back tone.
Intercept Routing—DND If a called party is in DND mode, the call is redirected to the preprog-
rammed destination.
Intercept destinations can be assigned to extension ports.
®
6.1 [4-1-1] Wired Extension—Extension Settings—Intercept Destination— Intercept Destination—When
called party does not answer—Day, Lunch, Break, Night
®
6.10 [4-2-1] Portable Station—Extension Settings—Intercept Destination— Intercept Destination—
When called party does not answer—Day, Lunch, Break, Night
®
[604] Extension Intercept Destination
When the original destination is: The Available Intercept Destination is:
•
Wired Extension (PT/SLT/T1-OPX)
•
PS
The destination assigned to the original extension.
6.1 [4-1-1] Wired Extension—Extension Settings—
Intercept Destination
→
Intercept Destination—When called party does
not answer—Day, Lunch, Break, Night
→
Intercept Destination—When Called Party is
Busy
6.10 [4-2-1] Portable Station—Extension Settings—
Intercept Destination
→
Intercept Destination—When called party does
not answer—Day, Lunch, Break, Night
→
Intercept Destination—When Called Party is
Busy
®
[604] Extension Intercept Destination
30 Feature Guide
1.1.1 Incoming Trunk Call Features