Panasonic HYBRID IP-PBX KX-TDA200, Features Manual

Page: 285 / 464

1.25 Portable Station (PS) Features
1.25.1 Portable Station (PS) Connection
Description
This PBX supports the connection of a PS. Cell Stations (CSs) allow PSs to receive reception within a
designated area. It is possible to use the PBX features using the PS like a PT.
Conditions
[General]
•
The PS registration is required through the system programming. To avoid unexpected registration to
another PBX, the Personal Identification Number (PIN) for the PBX is necessary to register a PS. The
registration can be cancelled.
•
A PS can only be assigned an extension number of 4 digits or less.
•
Handover
Even if a PS user moves during a conversation, the PS will automatically switch between cells without
disconnecting the call (
Handover ).
Handover is available in any of the following cases:
a.
During a conversation with an extension or outside party.
b.
While a call is ringing at the PS.
c.
While the PS is in idle status.
PBX
CS
Handover:
Calls will not be
disconnected.
CS
CS
Interface
However, Handover is not available in any of the following cases:
a.
When the new (Handover) CS is busy.
b.
When there is no CS within range.
c.
While the Live Call Screening (LCS) or Two-way Record is activated (
®
1.24.3 Voice Mail DPT (Digital)
Integration).
d.
While the PS user is paging other extensions (
®
1.15.1 Paging).
e.
During a doorphone call (
®
1.17.1 Doorphone Call).
f.
While the PS user is dialling digits to make a trunk call.
g.
During a conversation with an extension using PC Console or PC Phone, to which the conversation is
being recorded.
h.
While participating as a member of a broadcasting call (
®
1.16.1 Broadcasting).
•
When a caller has dialled the extension number of a PS but the CS is busy, the caller hears a busy tone.
[KX-TDA600]
•
When an EMEC card is installed, the total number of PSs that the PBX supports will increase.
Feature Guide 285
1.25.1 Portable Station (PS) Connection