Panasonic HYBRID IP-PBX KX-TDA200, Features Manual

Page: 257 / 464

1.21.1.6 Call Hold (HOLD)—by ISDN
Description
An ISDN call can be put on hold using the ISDN service of the telephone company, instead of the PBX feature.
This can be a part of a Call Transfer (CT)—by ISDN (
®
1.21.1.7 Call Transfer (CT)—by ISDN) and Three-party
Conference (3PTY)—by ISDN (
®
1.21.1.8 Three-party Conference (3PTY)—by ISDN). This feature allows
an ISDN call to be held, and a call to be made to another outside party using only one communication channel
of ISDN. A PT user can easily use this feature by pressing the ISDN Hold button.
Conditions
•
This feature complies with the following European Telecommunication Standard (ETS) specification:
–
ETS 300 141 Call Hold (HOLD) supplementary service.
•
ISDN Hold Button
A flexible button can be customised as the ISDN Hold button.
•
The availability of this feature is dependent on the contract with the telephone company.
•
The TRS/Barring feature is applied when making a call after activating this feature. (
®
1.9.1 Toll Restriction
(TRS)/Call Barring (Barring))
•
ARS cannot be applied to the call dialled after activating this feature. (
®
1.10.1 Automatic Route Selection
(ARS))
•
It is impossible to seize any other trunk during this feature.
PC Programming Manual References
4.8 [2-6-1] Numbering Plan—Main—Features— ISDN Hold
6.5 [4-1-4] Wired Extension—Flexible Button— Type
6.13 [4-2-3] Portable Station—Flexible Button— Type
6.17 [4-3] DSS Console— Type
PT Programming Manual References
None
Feature Guide References
1.20.2 Flexible Buttons
Feature Guide 257
1.21.1 Integrated Services Digital Network (ISDN)