Panasonic HYBRID IP-PBX KX-TDA100, Pc Programming Manual

Page: 793 / 854

2.18 [11] Maintenance
PC Programming Manual 793
Communication—Word Length
Specifies the number of bits in each byte of a character.
When connecting the Maintenance Console to the PBX using an RS-232C cable, assign the following
values to the Serial Interface (RS-232C) port of the PBX:
Word Length : 8 bit, Parity Bit : None, Stop Bit : 1 bit
CAUTION
Do not use the following combinations:
• Word Length : 8 bit, Parity Bit : Space, Stop Bit : 1 bit
• Word Length : 8 bit, Parity Bit : Mark, Stop Bit : 2 bit
• Word Length : 8 bit, Parity Bit : Space, Stop Bit : 2 bit
Value Range
7 bit, 8 bit
Maintenance Console Location
2.18.1 [11-1] Main
Programming Manual References
None
Feature Guide References
1.26.1 Station Message Detail Recording (SMDR)
Communication—Flow
Enables the hardware flow control.
Value Range
None, Hardware
Maintenance Console Location
2.18.1 [11-1] Main
Programming Manual References
None
Feature Guide References
None
Communication—Stop Bit
Selects a stop bit code that indicates the end of a bit string which composes a character.
Select an appropriate value depending on the requirements of the printer or personal computer.
Value Range
1 bit, 2 bit