Panasonic HYBRID IP-PBX KX-TDA100, Feature Manual, Page: 251 / 364

1.13 P
Feature Manual 251
Conditions
• This feature is available under the following conditions:
a)
The caller's PBX is capable of using CCBS.
b)
The called party's PBX is capable of accepting CCBS.
• For ISDN, receiving and sending CCBS must be enabled individually on an ISDN (QSIG) port basis
through system programming.
• An extension user can set only one CCBS. The last setting is effective.
• The CCBS setting is canceled if there is no callback ringing within 60 minutes or callback ringing is not
answered within 10 seconds.
Programming References
PC Programming Manual
2.7.14 [1-1] Slot—PRI Port (KX-TDA100/KX-TDA200/KX-TDA600 only)—Supplementary Service—COLP,
CLIR, COLR, CNIP, CONP, CNIR, CONR, CF (Rerouting), CT, CCBS, E911
2.7.32 [1-3] Option—New Card Installation—ISDN Standard Mode for PRI23 Card (KX-TDA100/KX-
TDA200/KX-TDA600 only)
PT Programming Manual
None
1.13.20 Private Network Features—QSIG—CF (Call Forwarding)
Description
The PBX forwards the call to a destination extension in another PBX in the QSIG network. The destination
can be set on your own PBX on an extension basis as the forward destination of CO line calls (
→
1.6.6 FWD
(Call Forwarding)).
If the same trunk group is used for the incoming call and the forwarded call, the following situation will be
possible.