Panasonic HYBRID IP-PBX KX-TDA100, Feature Manual, Page: 24 / 364

1.1 A
24 Feature Manual
2.4.7 Tool—Import
→
ARS - Leading Digit
→
ARS - Except Code
→
ARS - Routing Plan
2.4.8 Tool—Export
2.8.4 [2-3] Timers & Counters—Dial / IRNA / Recall / Tone—Dial—Extension Inter-digit
2.8.17 [2-9] System Options—Option 3—Dial Tone—Dial Tone for ARS
2.10.1 [4-1-1] Wired Extension—Extension Settings—Option 2—ARS Itemized Code
2.10.10 [4-2-1] Portable Station—Extension Settings—Option 2—ARS Itemized Code
2.12.3 [6-3] Verification Code—Itemized Billing Code for ARS
2.14 [8] ARS
2.17.1 [11-1] Main—SMDR—SMDR Options—ARS Dial
PT Programming Manual
[320] ARS Mode
[321] ARS Leading Number
[322] ARS Routing Plan Table Number
[325] ARS Exception Number
[330] ARS Routing Plan Time Table
[331–346] ARS Routing Plan Table (1–16) (KX-TDA50/KX-TDA100/KX-TDA200 only)
[347] ARS Routing Plan Table (1–48) (KX-TDA600 only)
[350] ARS Carrier Name
[351] ARS Trunk Group for Carrier Access
[352] ARS Removed Number of Digits for Carrier Access
[353] ARS Carrier Access Code
Feature Manual References
2.1 Capacity of System Resources
1.1.4 Automatic Callback Busy (Camp-on)
Description
If the line is busy when a call is made, a callback ring can inform the caller when the line becomes free.
If the called party was another extension, or if the dialed number is handled by Automatic Route Selection
(ARS), the number is automatically redialed after the extension user answers the callback ring.
Conditions
• If the callback ring is not answered within 10 seconds, callback is canceled.
• If the extension hears a busy tone before dialing the telephone number, only the CO line or trunk group
is reserved. After answering the callback ring, the extension should dial the telephone number.
• An extension can set only one Automatic Callback Busy. The last setting is effective.
• Multiple extension users can set this feature for the same CO line at the same time.
However, a maximum of four extension users can set this feature to one extension.