manualshive.com logo in svg

Panasonic HYBRID IP-PBX KX-TDA100, Feature Manual, Page: 173 / 364

Share
Download
Panasonic HYBRID IP-PBX KX-TDA100 Feature Manual Download Page 173

1.10 L

Feature Manual

173

1.10 L

1.10.1 LED Indication

Description

The LED of the Message/Ringer Lamp and the following buttons (Line Status Buttons and Corresponding 
Extension Status Button) can indicate line status with a variety of light patterns.

Line Status Buttons:

 S-CO, G-CO, L-CO, INTERCOM, ICD Group, PDN

Corresponding Extension Status Button:

 DSS, SDN

1.

Light Pattern of the Message/Ringer Lamp

[Digital proprietary telephone (DPT)]

•

Incoming call from a CO line: Red flashing

•

Incoming call from another extension: Green flashing

•

Message(s) present (no incoming call): Red on

•

No message(s) present (no incoming call): Off

[Analog proprietary telephone (APT)]

•

Incoming call: Red flashing

•

Message(s) present (no incoming call): Red on

•

No message(s) present (no incoming call): Off

Summary of Contents for HYBRID IP-PBX KX-TDA100













































































































































































































































































































































































Reviews:

No comments