Panasonic HYBRID IP-PBX KX-TDA100, Feature Manual, Page: 148 / 364

1.9 I
148 Feature Manual
[620] Incoming Call Distribution Group Member
[621] Incoming Call Distribution Group Delayed Ringing
[622] Incoming Call Distribution Group Floating Extension Number
[624] Incoming Call Distribution Group Distribution Method
[690] PS Registration
Feature Manual References
1.13.16 Private Network Features—Network ICD Group
1.19.2 Virtual PS
1.9.5 ICD Group Features—Overflow
Description
When waiting calls exceed the waiting queue capacity, they may be redirected to a preprogrammed
destination or a busy tone may be sent to the callers by the following features:
1)
Intercept Routing—Overflow in an Incoming Call Distribution Group
2)
Busy on Busy
1.
Intercept Routing—Overflow in an Incoming Call Distribution Group
Intercept Routing—Overflow in an Incoming Call Distribution Group works in one of following
conditions:
a)
There is no space in the waiting queue.
b)
The Queuing Time Table is not assigned and there are no extensions logged in.
c)
An Overflow command is assigned to the Queuing Time Table.
d)
The Overflow time expires.
e)
Manual Queue Redirection is performed.
[Available Destination]
The overflow destinations can be assigned for each incoming call distribution group and each time
mode (day/lunch/break/night) (
→
1.17.5 Time Service). The destination can be assigned as follows,
depending on the above conditions.
• For a) and b):
→
2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings—Overflow Queuing
Busy—Queuing Busy—Destination-Day, Lunch, Break, Night
→
[627] Destination When All Busy
• For c), d), and e):
→
2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings—Overflow No Answer—
Time out & Manual Queue Redirection—Destination-Day, Lunch, Break, Night
→
[625] Destination for Overflow Time Expiration
Destination Availability
Wired Extension (PT/SLT/T1-OPX)
PS