Panasonic HYBRID IP-PBX KX-TDA100, Feature Manual, Page: 134 / 364

1.8 H
134 Feature Manual
• A Host PBX Access Code can be used to record only long distance calls on SMDR when a CO line port
is connected directly to the telephone company (not a host PBX). This is allowed when the long
distance code (e.g., “0”) is assigned as the Host PBX Access code. All local calls (e.g., calls that do not
require a “0” to be dialed first) are treated as extensions of the telephone company and do not get
recorded on SMDR, because in this case this PBX recognizes the telephone company as the host PBX.
Therefore, only long distance calls are recorded on SMDR.
Programming References
PC Programming Manual
2.9.1 [3-1-1] Trunk Group—TRG Settings—Host PBX Access Code
2.17.1 [11-1] Main—SMDR—SMDR Options—ARS Dial
PT Programming Manual
[471] Host PBX Access Code
Feature Manual References
1.16.1 SMDR (Station Message Detail Recording)
2.1 Capacity of System Resources
1.8.6 Hot Line
Description
An extension user can make an outgoing call by simply going off-hook, if the user has previously stored the
telephone number or the extension number.
If the Hot Line feature is set and the user goes off-hook, a dial tone is generated for a specified time
assigned through system programming and then dialing starts. During this waiting time the user can dial
another party, overriding the Hot Line feature.
This feature is also known as Pickup Dialing.
Conditions
• Compatible Telephone
Proprietary telephone (PT), single line telephone (SLT), T1-OPX, and portable station (PS)
Programming References
PC Programming Manual
2.8.4 [2-3] Timers & Counters—Dial / IRNA / Recall / Tone—Dial—Hot Line (Pickup Dial) Start
2.8.8 [2-6-1] Numbering Plan—Main—Features—Hot Line (Pickup Dial) Program Set / Cancel
2.10.1 [4-1-1] Wired Extension—Extension Settings—Option 2
→
Pickup Dial Set
→
Pickup Dial Number
2.10.10 [4-2-1] Portable Station—Extension Settings—Option 2
→
Pickup Dial Set
→
Pickup Dial No.
PT Programming Manual