Panasonic HomeHawk KX-HNC800, User Manual

Page: 95 / 156

medium
low
needs charging
R Battery charging status icons:
charging
Camera signal strength
You can check the signal strength of each camera’s wireless connection to the access point.
1
From the [HomeHawk] app home screen, tap
®
[Settings] .
2
Tap [Camera Settings] and select the desired camera.
3
Tap [Signal Strength] .
4
Confirm the number of dark gray bars.
R More dark gray bars indicate a stronger signal.
Strongest signal
Good signal
Weak signal
Could not obtain signal information
No signal
Image, sound, and recording settings
Speaker volume settings
Adjusting the talk volume
You can adjust the volume of your mobile device’s microphone, which determines the volume of your
voice that is sent to the camera when talking to the camera.
1
From the [HomeHawk] app home screen, tap
®
[Settings] .
2
Tap [Camera Settings] and select the desired camera.
3
Tap [Speaker Volume]
®
[Talk Volume] .
4
Adjust the volume as desired and then tap [OK] .
Adjusting the motion detection volume
You can adjust the volume of the camera audio (beeps, announcements, etc.) that sounds from the
camera when motion is detected.
1
From the [HomeHawk] app home screen, tap
®
[Settings] .
95
Using a front door camera and outdoor camera