Panasonic HomeHawk KX-HNC800, User Manual

Page: 100 / 156

2
Tap [Camera Settings] and select the desired camera.
3
Tap [System]
®
[Firmware Update] .
R The camera will connect to the Internet and check for a newer version of its firmware.
4
Follow the on-screen instructions.
Resetting camera settings
1
From the [HomeHawk] app home screen, tap
®
[Settings] .
2
Tap [Camera Settings] and select the desired camera.
3
Tap [System]
®
[Reset Camera Settings] .
4
Follow the on-screen instructions.
Note:
R Camera registration information stored on the access point is not reset.
Access point features
Access point features (overview)
Using multiple access points
You can purchase and configure multiple systems, such as one for your home, one for your workplace,
and one for your vacation home. If you register your mobile device to each access point, you can access
any of your systems conveniently from the same mobile device, and switch between systems as desired.
Note:
R Your mobile device can only connect to and control one access point (and devices connected to it) at a
time.
Registering your mobile device to additional access points
You can register your mobile device to multiple access points. Use this procedure to register your mobile
device to an additional access point.
1
From the [HomeHawk] app home screen, tap .
2
Tap [Add Camera(s)] .
3
Tap [FRONT DOOR Camera Kit ( + OUTDOOR Cameras )] and continue from step 3 of “Initial
setup”, Page 81.
Changing access point names
You can change the access point name.
The access point name setting is used to identify the access point. This is useful when you have multiple
access points.
1
From the [HomeHawk] app home screen, tap
®
[Settings] .
2
Tap [Access Point Settings] and select the desired access point.
3
Tap [Name] .
4
Enter the desired name.
100
Using a front door camera and outdoor camera