Operating Instructions
25
2
Software Operation
2.1
Selecting a Folder to Save Images
This software records camera images to the hard disk on your PC. The folder can
be changed. After the camera is registered, destination folders are automatically
created in the selected folder. The recorded images are saved in the destination
folders.
•
If the destination folder is not selected, the recorded images are saved into the
destination folders at the destination folder where Network Camera Recorder
is installed.
•
You can change the destination folder to another folder or external hard disk
drives.
Notes
•
The folder must have more than 100 MB free capacity.
•
The level of the folder-hierarchy depth must be within 6 to prevent the system
from getting unstable.
•
The recorded images in the destination folder are displayed on the screen. If
you change the destination folder, the recorded images in the former folder are
not displayed.
•
File sizes of recorded images listed below can be used as a baseline. (1 frame
size)
•
Recorded capacity can be calculated by
Size (KB) x Frame Rate (frames per second) x time (second).
E.g.
640 x 480 resolution, Favor Clarity and 12 frames per second for an hour
settings
50 (KB) x 12 (fps) x 3,600 (s) = 2,160,000 (About 2.06 GB)
If the audio is attached, add 4 KB per second.
2,160,000 (KB) + 4 (KB) x 3,600 (s) = 2,174,400 (About 2.08 GB)
Resolution
Items
Favor
Clarity
Standard
Favor
Motion
640 x 480
File Size
About
50 KB
About
33 KB
About
20 KB
320 x 240
File Size
About
25 KB
About
16 KB
About
8 KB
160 x 120
File Size
About
7 KB
About
5 KB
About
3 KB
