Panasonic HDC-SDT750 Page 94 Operating Instructions Manual Download

Page: 94 / 163

VQT3B52

∫

Playback time setting

Touch the playback time.

≥

The playback time of [AUTO] is a maximum of
approx. 5 minutes.

≥

Playback time may become shorter than the setting,
or it may not even play back if the part recognised as
clearly recorded is short.

∫

Date setting

Touch the playback date.

∫

Music setting

Touch your favourite music.

≥

When [NO MUSIC] is selected, the audio recorded at
the time of shooting is played back.

≥

To adjust the volume of music during playback or
audio testing, operate the volume lever or the adjust
zoom buttons. (

34)

Touch [ENTER].

To test the music audio
Touch [START].

≥

Touch the other music option to change the music to be tested.

≥

When you touch [STOP], the music playback stops.

Summary of Contents for HDC-SDT750




































































































































































Search results

Summary of Contents for HDC-SDT750

Reviews:

Related manuals for HDC-SDT750

Brands by name

Popular brands

Panasonic HDC-SDT750, Operating Instructions Manual

Search results

Summary of Contents for HDC-SDT750

Reviews:

Related manuals for HDC-SDT750

Brands by name

Popular brands