40
VQT3B52
Please refer to page 45.
The recording lamp lights up during recording and flashes when the unit receives a signal
from the remote control or when the self-timer is counting down. When this is set to [OFF], it
does not light during recording.
Touch screen operation, start and stop of recording and unit on/off can be confirmed with this
sound.
(Volume low)/
(Volume high)
2 Beeps for 4 times
When an error occurs. Check the sentence displayed on the screen. (
This makes it easier to view the LCD monitor in bright places including outdoors.
≥
These settings will not affect the images actually recorded.
≥
It is possible to set from the quick menu. (
36)
(Makes even brighter)/
(Makes brighter)/
(Normal)/
(Makes less bright)/
*(Automatic adjustment)
* It is not displayed in the manual mode or in the playback mode.
≥
When the AC adaptor is in use, the LCD monitor is set to
automatically.
≥
The recordable time will become shorter when you use this unit with the LCD monitor lit up.
It adjusts brightness and colour density on the LCD monitor.
≥
These settings will not affect the images actually recorded.
1
Touch [LCD SET].
2
Touch the desired setting item.
[BRIGHTNESS]:
Brightness of the LCD monitor
[COLOUR]:
Colour level of the LCD monitor
3
Touch
/
to adjust settings.
4
Touch [ENTER].
≥
Touch [EXIT] or press the MENU button to exit the menu
screen.
[REMOTE CONTROL]
[OFF]/[ON]
[REC LAMP]
[OFF]/[ON]
[ALERT SOUND]
[OFF]/
/
[POWER LCD]
/
/
/
/
+2
+1
0
-1
A
+2
+1
0
-1
A
+1
[LCD SET]
