Panasonic HDC-SDT750 Operating Instructions Manual Download

Page: 161 / 163

161

VQT3B52

Others

Optional accessories

Product numbers correct as of Aug. 2010. These may be subject to change.
Some optional accessories may not be available in some countries.

∫

Attaching the battery pack
holder kit

To use the VW-VBG6 for this unit, the
battery pack holder kit/VW-VH04 (optional)
is required.

Insert the DC cable to this unit.

Insert the battery to the battery holder.

≥

Do not pinch the DC cable with the LCD
monitor.

AC adaptor (VW-AD21E/EB-K)

Battery pack (lithium/VW-VBG130)

Battery pack (lithium/VW-VBG260)

Battery pack (lithium/VW-VBG6)

Battery pack holder kit (VW-VH04)

HDMI mini cable (RP-CDHM15,
RP-CDHM30)

Wide conversion lens (VW-W4607H)

Wide end conversion lens (VW-WE08H)

Filter kit (VW-LF46NE)

Video DC light (VW-LDC103E)

Light bulb for video DC light (VZ-LL10E)

Stereo microphone (VW-VMS2E)

Shoe adaptor (VW-SK12E)

DVD burner (VW-BN2)

DVD burner (VW-BN01)

*1 The supplied DC cables cannot be

used on this unit.

*2 The battery pack holder kit/VW-VH04

(optional) is necessary.

*3 When using the VW-WE08H, set the

zoom to W (wide) side. The focus will
be slightly out when it is set to T (tele)
side, so remove the VW-WE08H when
recording set to T (tele) side.

*4 When using the VW-LF46NE, remove

the lens hood (supplied) and set to the
flash setting to

(OFF).

*5 External microphone may intrude into

the frame when recording. Set the
zoom to wide angle, and tilt the
external microphone upward so it will
not intrude into the frame. This will not
affect the audio being recorded.

VW-VBG6

VW-VH04





Summary of Contents for HDC-SDT750




































































































































































Search results

Summary of Contents for HDC-SDT750

Reviews:

Related manuals for HDC-SDT750

Brands by name

Popular brands

Panasonic HDC-SDT750, Operating Instructions Manual

Search results

Summary of Contents for HDC-SDT750

Reviews:

Related manuals for HDC-SDT750

Brands by name

Popular brands