Panasonic HDC-SDT750 Operating Instructions Manual Download

Page: 135 / 163

135

VQT3B52

With a PC

Setup

Connecting to a PC

≥

Connect this unit to the PC after the software applications are installed.

≥

Remove the supplied CD-ROM from your PC.

USB cable (supplied)

Connect this unit to the AC adaptor.

≥

It is possible to use it connected to the PC with the batteries only, but you will not be able to
write data into the unit. Use the AC adaptor to free you from worrying about the battery
running down.

≥

Connect with the AC adaptor when using the Conversion assist function.

Turn on the unit.

≥

This function is available in all modes.

Connect this unit to a PC.

≥

The USB function selection screen will appear.

Touch [PC] on the screen of this unit.

≥

The Smart wizard screen is automatically displayed when HD Writer AE 2.6T is installed.

≥

This unit is automatically recognised as an external drive of the PC. (

137)

≥

When you select an option other than [PC], reconnect the USB cable.

≥

When using the battery, the LCD monitor turns off after about 5 seconds. Touch the screen
to turn the LCD monitor on.

Summary of Contents for HDC-SDT750




































































































































































Search results

Summary of Contents for HDC-SDT750

Reviews:

Related manuals for HDC-SDT750

Brands by name

Popular brands

Panasonic HDC-SDT750, Operating Instructions Manual

Search results

Summary of Contents for HDC-SDT750

Reviews:

Related manuals for HDC-SDT750

Brands by name

Popular brands