54
LSQT1093
Recording
≥
The PHOTO SHOT button on the remote
control cannot be pressed halfway.
≥
If the [PICT. QUALITY] is set to [
],
mosaic-pattern noise may appear on a
playback image depending on the picture
content.
≥
While this unit accesses the SD card (
is
displayed/the access lamp is lit), do not
perform the following operations. The SD card
or the recorded data may be damaged.
– Turn the unit off.
– Remove the SD card.
– Operate the mode dial.
≥
Other products may degrade or not play back
still pictures recorded on this unit.
≥
The edges of still pictures recorded on this unit
with a 16:9 aspect ratio may be cut at printing.
Check the printer or photo studio before
printing.
ª
About the screen indications
only when the photo shot button
is pressed halfway
A
Flash (
l
64)
B
Flash level (
l
65)
C
Red eye reduction (
l
65)
D
Quality of still pictures
E
Size of still pictures
F
Remaining number of still pictures
(Flashes in red when [0] appears.)
G
Card indication (
l
111)
H
MEGA optical image stabilizer (
l
53)
ª
About the focus indication
≥
The focus indication indicates the status of the
auto focus.
≥
The focus indication does not appear in manual
focus mode.
≥
Focus on a subject manually when it is not
easily focused. (
l
70)
≥
You can record still pictures on the card even if
the focus indication does not appear, but
pictures may be recorded without being
focused.
≥
The focus indication does not appear or has
difficulty displaying in the following cases.
– When the zoom magnification is high.
– When the unit is shaken.
– When the subject is moving.
– When the subject stands in front of a light
source.
– When close subjects and far subjects are
included in the same scene.
– When the scene is dark.
– When there is a bright part in the scene.
– When the scene is filled with only horizontal
lines.
– When the scene lacks contrast.
– When recording motion pictures.
– When the MagicPix function is used.
ª
Concerning the focusing area
When there is a contrasting object ahead or
behind the subject in the focus area, the subject
may not be focused. If so, move the contrasting
object out of the focus area.
Even when it is still difficult to focus, adjust the
focus manually.
≥
The focusing area is not displayed when the
digital zoom (more than approx. 12
k
) is used.
2.1
Ｍ
750
750
750
MEGA
A BC D E F G H
LSQT1093ENG.book 54 ページ ２００７年１月１５日 月曜日 午前９時２３分
