Panasonic HC-X800 Page 124 Owner'S Manual Download

Page: 124 / 184

124

VQT4C76

Connect the AC adaptor (supplied with DVD burner) to the DVD
burner.

≥

You cannot supply power to the DVD burner from this unit.

Connect this unit to the AC adaptor and change the mode to

Connect this unit to the DVD burner with the USB Connection Cable
(supplied with DVD burner).

USB Connection Cable (supplied with DVD burner)

DVD burner (optional)

≥

Insert the plugs as far as they will go.

Insert the disc in the DVD burner.

≥

Insert the DVD disc with the recording side down when using the DVD burner.

Touch the desired item.

[BURN DISC]:

Refer to page 125 for how to copy discs.

[PLAY DISC]:

Refer to page 127 for how to play back the copied discs.

To terminate the connection with the DVD burner

Touch [EXIT].

≥

Disconnect the USB Connection Cable from this unit.

HC-X900M&X800P&PC&PU-VQT4C76_mst.book 124 ページ２０１２年１月１１日　水曜日　午後１０時６分

Summary of Contents for HC-X800

























































































































































































Search results

Summary of Contents for HC-X800

Reviews:

Related manuals for HC-X800

Brands by name

Popular brands

Panasonic HC-X800, Owner'S Manual

Search results

Summary of Contents for HC-X800

Reviews:

Related manuals for HC-X800

Brands by name

Popular brands