Panasonic HC-X2050 Operating Instructions Manual Download

Page: 109 / 213

Chapter 5 Shooting

—

Adjustable settings when shooting

- 109 -

AE level (exposure compensation)

Adjusting with the rear ring

Select the [SCENE FILE] menu



[AE LEVEL]



[ON].

Select the [CAMERA] menu



[SW MODE]



[REAR RING]



[IRIS/AE LEVEL].

When the <AUTO/MANU> switch is set to manual mode, use one of the following operations to switch one of iris, gain, or shutter
speed to auto.

≥

Press the <IRIS> button to switch to auto iris mode.

≥

Press the <GAIN> button to switch to auto gain mode.

≥

Press the <SHUTTER> button to switch to auto shutter mode.

Rotate the rear ring.

At this time, the settings in [SCENE FILE] menu



[AE LEVEL EFFECT] are not reflected.

NOTE

When manual iris mode is enabled, the iris is adjusted when the rear ring is turned.

Setting with the multi manual function

Select the [SCENE FILE] menu



[AE LEVEL]



[ON].

Select the [CAMERA] menu



[SW MODE]



[REAR RING]



[ZOOM] or [IRIS].

Switch one of iris, gain, or shutter speed to auto.

Turn the multidial to display [

AE LEVEL].

Press the multidial.

The AE level display is highlighted in orange.

Turn the multidial to adjust, then press the multidial.

The setting changes to the value displayed and exits.
Press the <EXIT> button to exit without changing the setting.

Applications for the USER button

You can also either press the USER button assigned to [AE LEVEL] or touch the USER button icon to switch enable/disable of [AE LEVEL].

≥

[AE LEVEL] is set in the <AE LEVEL>/<USER4> button at the time of purchase.

≥

Refer to page 49 for USER button settings.

NOTE

AE level adjustments are not possible when IR recording is enabled.

Exposure compensation value

AE LEVEL

+1.0EV





Summary of Contents for HC-X2050






















































































































































































































Search results

Summary of Contents for HC-X2050

Reviews:

Related manuals for HC-X2050

Brands by name

Popular brands

Panasonic HC-X2050, Operating Instructions Manual

Search results

Summary of Contents for HC-X2050

Reviews:

Related manuals for HC-X2050

Brands by name

Popular brands