Panasonic HC-X2000 Owner'S Manual Download

Page: 48 / 215

Chapter 3 Preparation

—

Setting of time data

- 48 -

How to input user bits

By setting user bits, information such as memos (date, time) up to 8 digits long (hexadecimal) can be recorded.

Select the [RECORDING] menu

→

[TC/UB]

→

[UB MODE]

→

[USER].

Select the [RECORDING] menu

→

[TC/UB]

→

[UB PRESET].

The user bits setting screen is displayed.

Set the user bits.

≥

Set 2 digits each.
You can reset to [00] by either pressing the USER button assigned to [RESET] or touching the USER button icon.

Confirm the setting value of the user bits.

≥

The setting value is confirmed when last 2 digits are set.

Memory function of the user bits

The setting content of the user bits is automatically recorded and maintained even if the power is turned off.

Frame rate information

The relationship between frame rate, image pull-down, time code, and user bits is as follows.

∫

Camera video mode

The display of the camera video mode differs depending on the setting of following menus.

≥

The [SYSTEM] menu

→

[REC FORMAT]

≥

The [SYSTEM] menu

→

[SUPER SLOW]

Setting the time code

Select the [SYSTEM] menu

→

[FREQUENCY]

→

[59.94Hz]/[50.00Hz].

From the [SYSTEM] menu

→

[FILE FORMAT]/[REC FORMAT], select the recording format.

Select the [RECORDING] menu

→

[TC/UB]

→

[DF/NDF]

→

[DF]/[NDF].

Select the [RECORDING] menu

→

[TC/UB]

→

[TC PRESET].

The [TC PRESET] screen is displayed.

Set the time code.

You can reset the time code to 0 by either pressing the USER button assigned to [RESET] or touching the USER button icon.

Confirm the setting value of the time code.

The setting value is confirmed when last 2 digits are set.

Verification information on the right-hand 6 digits

Fixed values

Frame rate

Camera video mode

REC mark

[FREQUENCY]

Frame rate of [REC FORMAT]

Display of camera video mode

When [SUPER SLOW] is [ON]

When [SUPER SLOW] are [OFF]

[59.94Hz]

23.98p

29.97p

59.94p

59.94i

—

[50.00Hz]

25.00p

50.00p

50.00i

—

Item

Time code display example

Description

[DF]

TCG 00:00:00.00

Time code is compensated in accordance with the actual time. It is mainly used
for broadcasting such as TV programs.

[NDF]

TCG 00:00:00:00

It will not compensate the time code. (There will be a difference from the actual
time)







 

Summary of Contents for HC-X2000
























































































































































































































Search results

Summary of Contents for HC-X2000

Reviews:

Related manuals for HC-X2000

Brands by name

Popular brands

Panasonic HC-X2000, Owner'S Manual

Search results

Summary of Contents for HC-X2000

Reviews:

Related manuals for HC-X2000

Brands by name

Popular brands