Panasonic HC-X2000, Owner'S Manual

Page: 101 / 215

Chapter 4 Operation — Handling setting data
- 101 -
3
Select [Enter].
A confirmation screen is displayed.
4
Select [SET].
The file is saved.
≥ An error message may be displayed. For details about the error message, refer to “Cases indicated by error messages”. ( l 188)
∫ Saving the scene file by overwriting a file on the memory card
Overwrite the file selected in the list of scene files saved in the memory card in card slot 1 with the current setting values of the unit.
1
Select the [OTHERS] menu
→
[FILE]
→
[SCENE FILE(SD CARD)]
→
[SAVE].
The list of scene files saved in the memory card in card slot 1 is displayed.
2
Select the file to overwrite from the list of scene files.
The file name entry screen and the keyboard are displayed. Leave it as is when overwriting.
3
Select [Enter].
A confirmation screen is displayed.
4
Select [SET].
The file is saved.
Loading the scene file
Load the scene files saved to the main unit memory or the memory card in card slot 1.
Loading the scene file from the main unit memory
1
Select the [SCENE FILE] menu
→
[LOAD/SAVE/INITIALIZE]
→
[LOAD].
2
Select [SET].
The file is loaded.
Loading the scene file from the memory card
1
Select the [OTHERS] menu
→
[FILE]
→
[SCENE FILE(SD CARD)]
→
[LOAD].
The list of scene files stored in the specified folder of the memory card in card slot 1 is displayed.
2
Select the file name for the file to load.
3
Selects if all of the scene files ([F1:] to [F6:]) are loaded, or individually loaded.
≥
To load all, select [ALL].
To load individually, select the scene number to load.
4
Select [SET].
The file is loaded.
≥
An error message may be displayed. For details about the error message, refer to “Cases indicated by error messages”. (
l
188)
Initialization of the scene file
Initializes the scene file saved in the main unit memory.
1
Select the scene file to return to the factory setting in the [SCENE FILE] menu
→
[FILE SELECT].
2
Select the [SCENE FILE] menu
→
[LOAD/SAVE/INITIALIZE]
→
[INITIALIZE].
The confirmation screen is displayed.
3
Select [SET].
The selected scene file returns to the factory setting.
Changing the scene file name
Changes the name of the scene file saved in the main unit memory.
Only changeable part is the title section of the scene file name. As an example, if the scene file name is [F6:CINE D], only the “CINE D” part can be
changed.
1
Select the scene file to change the name in the [SCENE FILE] menu
→
[FILE SELECT].
2
Select the [SCENE FILE] menu
→
[NAME EDIT].
The file name entry screen and the keyboard are displayed.
3
Enter the text to set with the keyboard.
≥ Enter a maximum of 8 alphanumeric characters.
≥
For information about entering text, refer to page 178.
4
Select [Enter].
The file name is updated.