Overview – What you can do with this unit
27
Card reader mode
Data (files) for performing nonlinear editing on a computer are transferred.
•
The unit supports USB3.1 Gen1.
(A) Memory card
*1
(B) USB cable
*2
(C) Computer
*1 Memory cards are optionally available. They are not supplied with the unit.
*2 A USB cable is not supplied with the unit.
When using a commercially-available USB cable, use a USB Type-C cable that conforms with USB3.1 and that is a shielded
product with a ferrite core. We recommend using a cable that is within 1.5 m (approx. 4.9 feet) where possible.
Connecting to the network
This unit is equipped with wireless LAN. It can connect to networks via wireless LAN or wired LAN.
•
(For the
)
When using wired LAN, connect a LAN cable to the <LAN> terminal on this unit.
•
(For the
)
When using wired LAN, connect a USB ethernet adaptor (commercially available) to this unit, then connect a LAN cable.
Available functions
When the unit is connected to a network, the following functions are available.
Connecting to HC ROP app
You can remotely control this unit with the HC ROP app by connecting this unit with an iPhone/iPad or Android terminal via
network.
•
Checking camera status
•
Camera remote control (focus, zoom, image quality settings, recording control such as start/end recording, and time code/user
bits settings)
•
Menu Operations
•
Starting and stopping streaming (when the function is assigned to the USER button)
The unit supports the multi camera function, with which a camera selected from up to 8 cameras is remotely controlled from a
single device.
For details about operation of the HC ROP app, refer to the online help for the app.
Streaming function
You can perform streaming of audio and video currently shot with the unit over a network (wired LAN, wireless LAN).
•
Use the following cable to connect to the <LAN> terminal:
– LAN cable (STP (Shielded Twisted Pair), category 5e or above, maximum 100 m (approx. 328 feet))
(A)
(B)
(C)
