Panasonic HC-X2 Operating Instructions Manual Download

Page: 144 / 313

Shooting – About auto mode/manual mode

144

About auto mode/manual mode

Switch between auto mode and manual mode with the <AUTO/MANU> switch.

<AUTO>:

auto mode

•

[A] is displayed at the upper part of the viewfinder and LCD monitor.

•

Focus, iris, gain, shutter, and white balance are automatically adjusted.

<MANU>:

manual mode

•

To adjust focus, iris, gain, shutter speed, and white balance manually, set the unit to manual mode.

•

To adjust the brightness, make adjustments to the iris, the AE level, and the ND filter. (

Iris: 151

)

•

To focus manually, use the focus operation. (

Focusing (manual focus): 156

)

•

To adjust the white balance, adjust the white balance and black balance. (

Adjusting the white and black balance: 163

)

•

To adjust the setting of the audio input and the recording level, switch audio input. (

Audio input: 182

)

Camera operations that are disabled in auto mode

– The following camera operations are disabled in auto mode:
– <IRIS> button, <GAIN> button, <SHUTTER> button, <WHITE BAL> button, <FOCUS A/M/

> switch, <PUSH AUTO>

button, <FOCUS ASSIST> button, focus ring

•

The following USER button functions are disabled in auto mode:
– [AWB]/[FBC]/[PUSH AUTO]/[ATW]/[FOCUS ASSIST]

•

The settings made in manual mode are not maintained for the following settings when you switch to auto mode:
– Focus, lens stop, gain, shutter speed, white balance

Summary of Contents for HC-X2


























































































































































































































































































































Search results

Summary of Contents for HC-X2

Reviews:

Related manuals for HC-X2

Brands by name

Popular brands

Panasonic HC-X2, Operating Instructions Manual

Search results

Summary of Contents for HC-X2

Reviews:

Related manuals for HC-X2

Brands by name

Popular brands