Home
/
Panasonic
/
HC-X1500
/
Operating Instructions Manual

Panasonic HC-X1500, Operating Instructions Manual, Page: 152 / 200

Share

Page: 152 / 200

Panasonic HC-X1500 Operating Instructions Manual Download Page 152

Chapter 6 Playback

—

Still image recording function

- 152 -

Still image recording function

One frame of the recorded video can be recorded as a still image.
Number of pixels of the still image to be recorded is same as the number of pixels of the recorded video.

1

Select by touching

or pressing the multidial at the scene to be recorded as a still

image while playing back.

The still image is recorded in the memory card being played back.

≥

It is convenient to use Pause, Slow-motion Playback and Frame-by-frame Playback.

@

NOTE

0

The playback will pause when a still image is recorded.

0

Recorded still image cannot be displayed in thumbnail, played back, copied, or deleted in the unit.

0

[INVALID] is displayed when the still image cannot be recorded in cases such as there is not enough remaining recording capacity in the memory card.

«
...
150
151
152
153
154
...
»

Summary of Contents for HC-X1500









































































































































































































Reviews:

No comments