Panasonic HC-X1500, Operating Instructions Manual

Page: 87 / 200

Chapter 4 Operation — Menu settings
- 87 -
[SUPER SLOW]
Sets the super slow recording. Enable this setting to shoot slow motion video.
The items that can be set are as follows.
≥ [ON], [OFF]
(Factory setting: [OFF])
@ NOTE
0
In the following cases, it is fixed to [OFF].
j
When the setting is other than [SYSTEM] menu
→
[FILE FORMAT]
→
[MOV]
j
When [SYSTEM] menu
→
[REC FORMAT] is set to other than [1080-59.94p/422LongGOP 100M], [1080-29.97p/422LongGOP 50M], [1080-23.98p/
422LongGOP 50M], [1080-50.00p/422LongGOP 100M], and [1080-25.00p/422LongGOP 50M]
j When using the face detection/tracking AE&AF function
[OTHERS] menu
Configures the settings for writing/loading/initializing user files to the internal memory and other settings of the unit.
[FILE]
Saves and loads the setting data.
For the saving and loading target, refer to “Target items for scene file/setup file/initialization”. (
l
91)
For details about saving and loading, refer to “Handling setting data”. ( l 97)
[SCENE FILE(SD CARD)]
Loads or saves scene files on a memory card.
[SETUP FILE(SD CARD)]
Loads or saves setup files on a memory card.
[SETUP FILE(MEMORY)]
Loads/saves/initializes setup files in the internal memory of the unit.
[SLOT FOR LOAD/SAVE]
Sets the card slot to load and save the scene file, setup file, and streaming setting file.
The items that can be set are as follows.
≥ [SLOT1], [SLOT2]
(Factory setting: [SLOT1])
[HANDLE TALLY LED]
Sets whether the tally lamp is to illuminate or not.
The items that can be set are as follows.
≥ [ON], [OFF]
(Factory setting: [ON])
[LOAD] Selects and loads the scene file saved on the memory card into the unit.
Can select if all of the scene files ([F1:] to [F6:]) are loaded, or individually loaded.
[SAVE] The setting values of the current scene file ([F1:] to [F6:]) are overwritten to the file selected from the list of scene files saved
in the memory card.
[SAVE AS] The setting values of the current scene file ([F1:] to [F6:]) is saved to the memory card as a new scene file by entering the file
name.
[LOAD] Selects the setup file saved on the memory card to load on the unit.
The unit will automatically restart after loading.
[SAVE] Overwrites the file selected in the list of the setup files saved on the memory card with the current setting values of the unit.
[SAVE AS] Enter a file name to save the current setting values in the unit as a new setup file in the memory card.
[LOAD] Loads setup file saved on the memory.
The unit will automatically restart after loading.
[SAVE] Saves the setup file to the memory.
[INITIALIZE] Restores the factory settings from the current settings for the menus in the setup file.
The unit will automatically restart after execution.