Panasonic HC-X1500 Page 143 Operating Instructions Manual Download

Page: 143 / 200

Chapter 6 Playback

—

Thumbnail operation

- 143 -

Thumbnail operation

Thumbnail operation overview

A clip is a group of data recorded by a single shooting, which includes additional information such as image, audio, and meta data.
The following operations can be performed while viewing the clip thumbnails displayed on the LCD monitor.

≥

Playback

≥

Delete

≥

Protect (only the clips recorded in MOV/MP4/AVCHD)

≥

Copy (only the clips recorded in AVCHD)

You can do these operations either with the multidial or by touching the LCD monitor.

NOTE

You can switch the memory card to be played back by pressing the <SLOT SEL> button.

Thumbnail screen

Press the <THUMBNAIL> button to display the thumbnail screen while displaying the camera image screen.
Press the <THUMBNAIL> button again to display the camera image screen.
The clips in the recording file format (MOV/MP4/AVCHD) selected in the [SYSTEM] menu

→

[FILE FORMAT] are displayed in the thumbnail screen.

≥

When you press the <MENU> button while displaying the thumbnail screen, you can perform thumbnail screen menu operations.

Clip status display
[ALL SLOT]:

Displays all the clips recorded on every memory card in each card slot. Displays in [ALL SLOT] when the thumbnail screen is
displayed from the camera image screen.

[SLOT1]:

Displays only the clips recorded on the memory card in card slot 1.

[SLOT2]:

Displays only the clips recorded on the memory card in card slot 2.

[SLOT1

→

SLOT2]:

Displayed when copying from the memory card in card slot 1 to the memory card in card slot 2.

[SLOT2

→

SLOT1]:

Displayed when copying from the memory card in card slot 2 to the memory card in card slot 1.

[SAME FORMAT]:

Displays only the clips recorded in the same format as the system format.

≥

Clips recorded in the same format match the current settings for each item of the [SYSTEM] menu

→

[FREQUENCY]/[FILE FORMAT]/

[REC FORMAT].

Function display

This is displayed during the operation of copy, delete, protect, etc.

File format

Displayed when MOV is selected as the recording file format.

Displayed when MP4 is selected as the recording file format.

Displayed when AVCHD is selected as the recording file format.

Displayed when MP4, or AVCHD is selected as the recording file format and when even one MOV clip is on any of the memory cards.

Displayed when MOV, or AVCHD is selected as the recording file format and when even one MP4 clip is on any of the memory cards.

Displayed when MOV, or MP4 is selected as the recording file format and when even one AVCHD clip is on any of the memory cards.

Media status display

The card slot number of the memory card where the clip in the cursor position is recorded is displayed in yellow.

Displaying the connection status of the wireless LAN

Displays the connection status of the wireless LAN.
(No display): It is not connected to the wireless LAN. It is set to the [NETWORK] menu

→

[DEVICE SEL]

→

[OFF].

A status where the wireless LAN is set and ROP is not connected.

A status where the wireless LAN is set and ROP is connected.

フビパヒブパ

ヶラュブペハペフ

ラユヷヤビパパ

ヶラュブペハペフ

フビパヒパパ

ヶラュビペハペヘ

ラユヷヤヒブパ

ヶラュビペハペヘ

フビビヒブパ

ヶラュビペハペヘ

フビパヒパパ

ヶラュビピハペベ

ラユヷヤヒブパ

ヶラュビピハペベ

フビビヒブパ

ヶラュビピハペベ

0001

00:00:00.00

0002

00:00:16.00

0003

00:00:32.15

0004

00:01:00.17

0005

00:01:24.02

0006

00:01:46.02

0007

00:02:30.20

0008

00:02:53.08

0009

00:03:30.20

000

00:

03:

30.

00:

03:

30.

Summary of Contents for HC-X1500









































































































































































































Search results

Summary of Contents for HC-X1500

Reviews:

Related manuals for HC-X1500

Brands by name

Popular brands

Panasonic HC-X1500, Operating Instructions Manual

Search results

Summary of Contents for HC-X1500

Reviews:

Related manuals for HC-X1500

Brands by name

Popular brands