- 64 -
About White Balance modes
*1 This setting is selected automatically when one of the following operations is performed:
j
Set [ATW] to [ON] and switch to Auto Mode. (
)
j
Press the USER button to which [ATW] is registered. (
j
Pressing the WHITE BAL button to switch to the item (Ach/Bch/PRST) setting in [ATW SET]
(
)
*2 You can enable this mode by pressing the USER button to which [ATW LOCK] is registered.
≥
In the following cases, even if you press the USER button to which [ATW] is registered or press
the WHITE BAL button, the White Balance mode cannot be changed:
j
In Auto Mode with [ATW] set to [ON]
j
During Freeze Frame (
≥
Changing the settings in [RB GAIN CONTROL SETTING] allows you to fine-adjust the color
balance settings of [Ach] and [Bch]. (
Display (Mode)
Settings
ATW (ATW)
*1
It will automatically adjust in accordance with the recording condition.
LOCK
(ATW Lock)
*2
It will lock the setting for ATW. (
)
P3200K
(P3200K)
Preset value for studio/indoor recording (halogen lamp, etc.)
P5600K
(P5600K)
Preset value for outdoors
VAR (VAR)
Setting can be finely adjusted in accordance to the recording conditions.
(
)
Ach (Ach)
Setting can be optimized for the scene to be recorded when you press the
WHITE BAL button to switch to [Ach]. (
)
Bch (Bch)
Setting can be optimized for the scene to be recorded when you press the
WHITE BAL button to switch to [Bch]. (
)
HC-X1_GD_DVQP1183ZA_eng.book 64 ページ 2016年11月28日 月曜日 午前11時44分