Panasonic HC-X1 Operating Instructions Manual Download Page 2

Page: 2 / 234

- 2 -

∫

Concerning the battery

Information for Your Safety

WARNING:

To reduce the risk of fire, electric shock or product damage,

≥

Do not expose this unit to rain, moisture, dripping or splashing.

≥

Do not place objects filled with liquids, such as vases, on this unit.

≥

Use only the recommended accessories.

≥

Do not remove covers.

≥

Do not repair this unit by yourself. Refer servicing to qualified service personnel.

CAUTION!

To reduce the risk of fire, electric shock or product damage,

≥

Do not install or place this unit in a bookcase, built-in cabinet or in another confined space.
Ensure this unit is well ventilated.

≥

Do not obstruct this unit’s ventilation openings with newspapers, tablecloths, curtains, and
similar items.

≥

Do not place sources of naked flames, such as lighted candles, on this unit.

The mains plug is the disconnecting device. Install this unit so that the mains plug can be
unplugged from the socket outlet immediately.

This unit is intended for use in moderate climates.

Warning

Risk of fire, explosion and burns. Do not disassemble, heat above 60

C or incinerate.

CAUTION

≥

Danger of explosion if battery is incorrectly replaced. Replace only with the type
recommended by the manufacturer.

≥

When disposing of the batteries, please contact your local authorities or dealer and ask for the
correct method of disposal.

HC-X1_GD_DVQP1183ZA_eng.book 2 ページ２０１６年１１月２８日　月曜日　午前１１時４４分

Summary of Contents for HC-X1











































































































































































































































Search results

Summary of Contents for HC-X1

Reviews:

Related manuals for HC-X1

Brands by name

Popular brands

Panasonic HC-X1, Operating Instructions Manual

Search results

Summary of Contents for HC-X1

Reviews:

Related manuals for HC-X1

Brands by name

Popular brands