Panasonic HC-WXF990M Operating Instructions Manual Download Page 82

Page: 82 / 267

- 82 -

In Motion Picture Recording Mode, you can further improve optical image stabilization by
touching and holding

. With this function, you can further reduce the effects of the

shake that tends to occur when using zoom.

Touch

to turn the Image Stabilizer on. (

)

Touch and hold

≥

Icon is displayed in

while you are touching and holding

≥

Optical Image Stabilizer Lock is released when you remove your finger from the icon.

∫

To make the display of

disappear

Display of

will not disappear even when no operation is performed for specific time with the default

setting. To make the display of

disappear, change the setting of the [O.I.S. LOCK DISPLAY].

≥

The Optical Image Stabilizer Lock function is not available in the following situations:

FULL HD Slow Motion Video Mode

(For the

series/

)

Slow & Quick Video Mode

≥

Stabilization may not be possible under strong shaking conditions.

≥

To record while moving the unit quickly, release Optical Image Stabilizer Lock.

It is possible to focus and record a still picture of a subject that is touched.

Touch

≥

An icon is displayed

Touch the subject.

≥

Focus area is displayed at the touched position, and a still
picture is recorded.

≥

Depending on the recording conditions or recognition of the touched position, it may not be
possible to record the intended picture.

≥

This will not operate for recording yourself.

Optical Image Stabilizer Lock



: [SETUP]

[O.I.S. LOCK DISPLAY]

desired setting

[ON]:

Constantly display.

[OFF]:

The icon will disappear after approx. 5 seconds without any touch operation.

Touch Shutter

MENU

WXF990

VXF990



Summary of Contents for HC-WXF990M












































































































































































































































































Search results

Summary of Contents for HC-WXF990M

Reviews:

Related manuals for HC-WXF990M

Brands by name

Popular brands

Panasonic HC-WXF990M, Operating Instructions Manual

Search results

Summary of Contents for HC-WXF990M

Reviews:

Related manuals for HC-WXF990M

Brands by name

Popular brands