- 85 -
Iris adjustment
Adjust it when the screen is too bright or too dark.
∫
When using
series/
series
1
Press the camera function button to change the manual ring setting to [IRIS].
(
2
Press the AUTO/MANUAL button to change to manual iris.
≥
The aperture (OPEN, F2.0, etc.) and gain (0dB, etc.) are displayed on the screen.
3
Rotate the Manual ring to adjust.
∫
When using
series/
series
≥
Switch to Manual Mode. (
1
Touch [IRIS].
2
Touch
/
to adjust settings.
≥
Touch [IRIS] to end the adjustment.
: Iris/Gain value:
CLOSE
!#
(F16 to F2.0)
!#
OPEN
!#
(0dB to 18dB)
≥
Value closer to CLOSE darken the image.
≥
Value closer to 18dB brighten the image.
≥
When the iris value is adjusted to brighter than OPEN, it changes to the gain value.
≥
To return to auto setting, change the Recording Mode to the Intelligent Auto Mode. (
≥
(For the
series/
series)
When setting both the shutter speed and the iris/gain value, set the shutter speed and then set
the iris/gain value.
≥
If the gain value is increased, the noise on the screen increases.
≥
Depending on the zoom magnification, there are iris values that are not displayed.
When turned in direction A:
When turned in direction B:
Brightness increased
Brightness decreased
WXF1
VXF1
A
B
VX1
V800
IRIS
VX1
V800
HC-WXF1-VXF1-VX1-V800EBEP-DVQP1585_eng.book 85 ページ 2018年2月22日 木曜日 午後12時30分