Panasonic HC-W585 Operating Instructions Manual Download

Page: 49 / 247

- 49 -

When [PICTURE SIZE] in Still Picture Recording Mode is set to [

7.4M], [

0.3M],

[

7.7M] or [

2M]:

* The Sub Window will be displayed in the aspect ratio set in [PICTURE SIZE].

Touch Sub Window.

Touch the display position you want to change.

≥

Depending on the display position of the Sub Window, the
positions of the icons displayed on the screen may change.

Touch Sub Window.

Touch

Touch the icon you want to set or adjust.

* This icon is displayed only in Motion Picture Recording Mode.

Aspect ratio

4:3 or 3:2*

1:1

Size

Changing the display position of the Sub Window

Setting and adjusting the Sub Camera and the Sub Window

[WB] :

Adjusts the colour balance.

Adjusts the brightness.

Allows you to enable Narration Mode.
Rejects ambient sound, allowing your voice to be recorded clearly.

Changes the colour of the Sub Window frame.

4:3

3:2

COLOUR

Summary of Contents for HC-W585
























































































































































































































































Search results

Summary of Contents for HC-W585

Reviews:

Related manuals for HC-W585

Brands by name

Popular brands

Panasonic HC-W585, Operating Instructions Manual

Search results

Summary of Contents for HC-W585

Reviews:

Related manuals for HC-W585

Brands by name

Popular brands